Synology AC E10M20-T1 M.2 Adapter & 10 Gigabit Ethernet Card

Synology AC E10M20-T1 M.2 Adapter & 10 Gigabit Ethernet Card

Mfr # E10M20-T1

Synology E10M20-T1 helps you boost I/O performance and network bandwidth simultaneously using just one PCIe expansion slot on your Synology NAS.

Main Features
Host Bus Interface: PCIe 3.0 x8
Bracket Height: Low Profile and Full Height
Size (Height x Width x Depth): 71.75 mm x 200.05 mm x 17.70 mm
Operating Temperature: 0°C to 40°C (32°F to 104°F)
Storage Temperature: -20°C to 60°C (-5°F to 140°F)
Relative Humidity: 5% to 95% RH

Storage
Storage Interface: PCIe NVMe
Supported Form Factor: 22110 / 2280
Connector Type and Quantity: M-key, 2 Slots

Network
IEEE Specification Compliance
• IEEE 802.3x Flow Control
• IEEE 802.3u Fast Ethernet
• IEEE 802.3ab Gigabit Ethernet
• IEEE 802.3bz 2.5Gbps / 5Gbps Ethernet
• IEEE 802.3an 10Gbps Ethernet
Data Transfer Rates: 10 Gbps
Network Operation Mode: Full Duplex
Supported Features
• 9 KB Jumbo Frame
• TCP/UDP/IP Checksum Offloading
• Auto-negotiation between 100Mb/s, 1Gb/s, 2.5Gb/s, 5Gb/s, and 10Gb/s
• TCP Segmentation Offload (TSO)
• Large Send Offload (LSO)
• Receive Side Scaling (RSS)
• Generic Receive Offload (GRO)
• Generic Segmentation Offload (GSO)

Compatibility
NVMe SSD
• SA series:SA3600, SA3400
• 21 series:RS4021xs+, RS3621xs+, RS3621RPxs, RS2821RP+, RS2421RP+, RS2421+, RS1221RP+, RS1221+
• 20 series:RS820RP+, RS820+
• 19 series:DS2419+, DS2419+II, DS1819+
• 18 series:RS3618xs, RS2818RP+, DS3018xs, DS1618+
• 17 series:RS18017xs+, RS4017xs+, RS3617xs+, RS3617RPxs, DS3617xs, DS3617xsII
Notes
• DSM version requirement: 6.2.3-25426 or later version
• DSM version requirement for RS18017xs+, RS4017xs+, RS3618xs, RS3617xs+, RS3617RPxs, DS3617xs and DS3617xsII: 7.0.1 or later version

Warranty
5 Year Warranty