StarTech 3m (9.8ft) LC to SC (UPC) OS2 Single Mode Duplex Fiber Optic Cable, 9/125, 100G, Low Insertion Loss, LSZH Fiber Jumper Cord
9.8ft LC/SC-UPC OS2 Single Mode Fiber Cable supports 100G networks and CWDM; 9/125um core/cladding; 1260-1625nm Laser Optimized; LSZH jacket w/molded strain reliefs; Bend Radius: 10mm (loaded/unloaded); Insertion Loss: ≤0.3dB; Return Loss: ≥55dB
OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.
Compatibility
This 9/125µm Single Mode fiber cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data center equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.
Engineered for Optimal Performance
Precision-manufactured ceramic ferrules ensure accurate fiber alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to SC fiber ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fiber core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fiber cable by reflecting the light back into the fiber. The OS2 fiber patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.
LSZH Cable Jacket
Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fiber cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.
Each OS2 fiber cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.
Technical Information
Cable Type: Fiber Optic
Cable Characteristic: Patch Cable
Fiber Optic Mode: Single - mode
Fiber Type: Duplex
Fiber Category: OS2
Cable Length: 9.84 ft
Connector Type on First End: LC Network - Male
Connector Gender on First End: Male
Connector on First End Details:2 x LC Network - Male
Connector Type on Second End: SC/UPC Network - Male
Connector Gender on Second End:Male
Connector on Second End Details:
2 x SC/UPC Network - Male
Jacket Type:LSZH
Device Supported:
- Network Device
- Server
- Switch
- Storage Device
Data Transfer Rate:
100 Gbit/s
Features:
- Laser-optimized
- Bendable
- Passive
- Ultra Physical Contact (UPC)
- Flame Retardant
- EMI Protection
Warranty
Limited Warranty: Lifetime
