Kendall Howard

45U 4-Post 19" Adjustable Rack with Grounding Studs - USA Made

(You save $175.89 )

Adding to cart… The item has been added
Mfr #:
Free shipping options available in the Minnesota 7-County Metro Area, please contact us for details! Not in our area? We can still provide a discounted quote! Call us today at 1-800-944-0338
97.00 LBS
Calculated at Checkout
Bulk Pricing:
Buy in bulk and save

Questions? Call us at 1-800-944-0338

Kendall Howard 45U 4-Post Adjustable Rack - USA Made B01N9SE1T7

Mfr # 1940-3-100-45

For an adjustable 4-point solution ideal for data centers and wiring closets, go with the 4-Post Adjustable Rack that easily mounts to any concrete surface with a Wedge Anchor Kit. Its usable depth can adjust from 26” to 38” so you’re not left with a fixed depth. To adjust the depth, simply move each bracket to your desired depth and secure the hardware in place. If you need a larger solution, gang multiple 4-Post Adjustable Racks together by using the ganging holes found on each side. You can even gang both the 24U and 45U size racks together because the holes align.

For installations that require connections be made above the rack, such as trunk cabling or ladder racks, simply go through the completely open frame at the top. The 4-Post Adjustable Rack features eight ¼-20 x 0.5” grounding studs on the inside of the four rails that allow you to ground your equipment directly to those studs. Also included with the rack are serrated tooth washers that, when tightened, dig in and remove paint from the rack, establishing electrical continuity throughout the rack. With its strength, durability, and adjustability the 4-Post Adjustable Rack is a sure fit for your next installation. B01N9SE1T7

• Adjustable usable depth from 26” to 38”
• 10-32 tapped rails
• Includes 50 10-32 rack screws
• Includes eight 1/4-20 grounding studs
• Ships knocked down
• Gangable
• 1,600 lb. weight capacity
• 19” EIA compliant
• Made in the USA
• Limited Lifetime Warranty
• Adjustable 35.04" to 50.04" (usable depth adjusts from 26" to 38")
• Depth 36.2"
• Height 84.12"
• Weight 97.00 lbs.
• Shipping Dimensions 88" L x 8.75" W x 5" H
• Material(s) CRS (Cold Rolled Steel)
• Black Powder Coated Finish
• Made in the USA
• Limited Lifetime Warranty

Adjustable Rack
The 4-Post Adjustable Rack can adjust its usable depth from 26” to 38” so it can be used in multiple network installations.  

The 4-Post Adjustable Rack’s welded L bracket base and cold rolled steel design forms a sturdy, reliable rack. Floor mounting holes are available to secure the rack to the floor for maximum durability. We always recommend installing your heaviest equipment at the lowest points on the rack.  

Ganging holes on both sides of the rack make it easy to gang and secure multiple racks together. The sides also feature cable pass through holes to allow cabling to pass from one rack to the next.  

Electrical Grounding
The rack features eight ¼-20 x 0.5” grounding studs on the inside of the four rails. These studs allow you to ground your equipment directly to the stud or with the use of bus bars, not included. The rack also includes serrated tooth washers to allow the frame to be grounded during the assembly process.  

Open Top Design
The 4-Post Adjustable Rack’s completely open top allows for smaller trunk cabling, and makes the rack compatible with most ladder racks and accessories.

What's in the box? B01N9SE1T7
Qty 4 – 45U Rails
Qty 4 – L Bases
Qty 4 – Upper Support Brackets
Qty 2 – Adjustable Left Arms
Qty 2 – Adjustable Right Arms
Qty 2 – Adjustable Center Arms
Qty 8 – 1/4-20 Grounding Studs
Qty 50 – 10-32 Rack Screws
Qty 1 – Assembly Hardware Pack (Qty-32 Tooth Washers, Qty-16 9/16 Hex Nuts, Qty-16 9/16 Hex Bolts, Qty-32 Flat Washers, Qty-16 7/16 Hex Nuts, Qty-16 7/16 Hex Bolts)

We offer design and manufacturing, kitting, deployment, support, onsite installation and more. Please contact us for USA Made solutions that can be customized to fit your requirements.

Made in the USA with Limited Lifetime Warranty



Related Products